Outil de calcul gratuit

Concrete Steps Calculator

Estimate concrete volume for poured concrete steps and stairs. This concrete stair calculator computes total volume based on step count, rise, run, width, and platform dimensions for accurate material ordering.

Stair Volume Formula

Sum of each step volume: step width x run x rise x count, plus platform volume

Comment utiliser cet outil

Enter the number of steps and step width.
Set rise (height) and run (depth) per step.
Add platform depth if applicable and calculate.

Calculate Concrete for Steps

Enter step dimensions and count to estimate total concrete volume for stair construction.

Number of Steps (steps) Count each individual step Step Width (pi) Minimum 3 ft for residential Rise per Step (dans) 7-7.75 in is code standard Run per Step (dans) 10-11 in tread depth is typical Top Platform Depth (dans) Set 0 if no landing platform Déchets (%)

Prêt à calculer ?

Entrez les valeurs et exécutez la calculatrice pour voir les résultats détaillés.

Concrete Steps Calculator FAQ

Des réponses claires aux questions courantes d’estimation et de planification.

What is the standard rise and run for concrete steps?

Standard residential concrete steps typically have a 7 to 7.75 inch rise and a 10 to 11 inch run per step.

How much concrete do I need for 4 steps?

Volume depends on step width, rise, and run. For example, 4 steps at 4 feet wide, 7.5 inch rise, and 11 inch run uses approximately 0.5 to 0.7 cubic yards including a landing platform.

Can I use this for concrete block steps?

This calculator estimates poured concrete volume. For block steps, use the block calculator to count blocks and this tool to estimate fill concrete.

Besoin de plus d’outils pour le béton et les blocs ?

Explorez la bibliothèque complète d'outils pour les blocs de béton, les dalles, les cours, le nombre de sacs et la planification des murs de soutènement.

Parcourir tous les outils