Gratis kalkylator

Concrete Steps Calculator

Estimate concrete volume for poured concrete steps and stairs. This concrete stair calculator computes total volume based on step count, rise, run, width, and platform dimensions for accurate material ordering.

Stair Volume Formula

Sum of each step volume: step width x run x rise x count, plus platform volume

Hur man använder det här verktyget

Enter the number of steps and step width.
Set rise (height) and run (depth) per step.
Add platform depth if applicable and calculate.

Calculate Concrete for Steps

Enter step dimensions and count to estimate total concrete volume for stair construction.

Number of Steps (steps) Count each individual step Step Width (ft) Minimum 3 ft for residential Rise per Step (i) 7-7.75 in is code standard Run per Step (i) 10-11 in tread depth is typical Top Platform Depth (i) Set 0 if no landing platform Avfall (%)

Redo att beräkna?

Ange värden och kör kalkylatorn för att se detaljerade resultat.

Concrete Steps Calculator FAQ

Tydliga svar på vanliga frågor om uppskattning och planering.

What is the standard rise and run for concrete steps?

Standard residential concrete steps typically have a 7 to 7.75 inch rise and a 10 to 11 inch run per step.

How much concrete do I need for 4 steps?

Volume depends on step width, rise, and run. For example, 4 steps at 4 feet wide, 7.5 inch rise, and 11 inch run uses approximately 0.5 to 0.7 cubic yards including a landing platform.

Can I use this for concrete block steps?

This calculator estimates poured concrete volume. For block steps, use the block calculator to count blocks and this tool to estimate fill concrete.

Behöver du mer betong- och blockverktyg?

Utforska det kompletta verktygsbiblioteket för betongblock, plattor, gårdar, antal påsar och planering av stödmurar.

Bläddra bland alla verktyg